A purple, closed cell, medium density spray applied insulation and air barrier polyurethane foam.

Amvic's EPS is non-structural, rigid insulation boards

made from 100% virgin, closed cell, Expanded

Polystyrene (EPS).

A one-component elastomeric material for use as a flexible waterproofing flashing membrane. SikaWall® -80 MaxFlash complies with building code requirements as listed in CCRR-0255 Code Compliance Research Report.

SikaWall®-85 Flash Seal NP is a 20-mil thick, self- adhering, self-sealing, composite membrane of polyester fabric and butyl adhesive. SikaWall®-85 Flash Seal NP is supplied in rolls, on release paper, for easy application.

SikaWall Color Advance is a 100% acrylic-based coating. Designed for spray, roller or brush-application over Sika Facades systems with minimum change in finish texture or sheen.

Reinforced, non-woven, polyester fabric designed for use with Sika Facades air/water-resistive barriers. Tested in accordance with ICC-ES Acceptance Criteria AC212 for water-resistive barrier coatings, AC 148 for flexible flashing and ASTM E2357 for air barrier assemblies.

Dry-mix polymer adhesive and base coat containing Portland cement, and requiring only water for mixing.

Alpha Base Coat is a 100% acrylic adhesive and base coat that is field-mixed with

Type I or Type II Portland cement. It has a very creamy texture that spreads easily.

Factory-mixed, 100% acrylic polymer finish coat. Fine Finish utilizes uniformly-sized

1.0 mm aggregate for a smooth, fine texture.

Factory-mixed, 100% acrylic polymer finish coat. Sahara Finish provides a uniform

1.5 mm “pebble” appearance.

Balanced, open-weave glass fiber reinforcing mesh, twisted multi-end strands treated for compatibility with Senergy Base Coats.

Senershield®-R is a one-component, fluid-applied vapor permeable vertical above grade air/water-resistive barrier with built in, low temperature application properties.